2,596 Reviews Scanned
- Pair of 1-inch Aluminum Dome Component Tweeters with Silk Edge
- Max Power : 320 Watts (Pair) / RMS Power : 80 Watts (Pair)
- Sensitivity : 92 dB
- Frequency Response : 1.3 kHz - 20 kHz
- Flush Mount Design / Neodymium Magnets
- All-In-One Complete EVL Series Subwoofer Bass Package
- Single 10-Inch Subwoofer Comes Pre-Wired and Loaded in Vented Custom Enclosure
- RP-1500.1D Class D Amplifier and 4 Gauge Wiring Kit Included
- Easy-to-Install - Tight and Accurate Bass
- 2,000 Watts Peak Power - 1,000 Watts RMS Power
- 3.5-inch High Compression Titanium Bullet Super Tweeters
- Max Power: 500 Watts
- RMS Power: 300 Watts
- The Max power rating, for each tweeter is 250 Watts, for a total of 500 Watts.
- 1" High Temperature Kapton Voice Coil with In-line Capacitor Crossover.Impedance: 4 Ohms and Frequency Response: 2.2K-20KHz
- Skar Audio FSX65 4 6.5" 4 Ohm mid range speaker
- 300 Watts Max | 150 Watts RMS
- 1.5" Voice coil Ferrite magnet
- Sensitivity : 92.5 Db 1w/1m
- Sold Individually (Set of 1).Dust Cap Material:Solid Composition Paper
- RMS Power at 2 Ohms: 250 Watts x 4 Channels
- RMS Power at 4 Ohms: 150 Watts x 4 Channel
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of...
- Pair of 1-inch High Performance Silk Dome Tweeters with Neodymium Magnets
- Max Power : 240 Watts (Pair) / RMS Power : 80 Watts (Pair)
- Sensitivity : 92 dB
- Frequency Response : 2.0 kHz - 20 kHz
- Surface, Angle and Flush Mountable Design
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- By drastically reducing the mounting depth, CS-Series Coaxial and Three-Way Speakers will fit in nearly every make and model of vehicle on the road...
- The perfect upgrade from your factory sound, a stamped-steel framework supports a rigid polypropylene cone and zero-protrusion PEI tweeters.
- UV-treated poly-foam surround resists heat or direct sunlight
- Neodymium tweeter magnets allow for increased volume in high frequencies
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of...
- AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage;...
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest; RCA connectors ensure a secure connection between...
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal; This makes...
- GREAT DEAL: Often a monoblock amp comes with a high price tag; Yet the Lanzar mono amplifier is budget friendly with all the features, reducing...
- Full-range
- Class-D amplifier
- Crossover HPF and LPF
- Frequency Response: 10Hz ~ 20KHz
- 1 channel of 1200 watts RMS @ 1 Ohms
- Slot Ported, Ultra Compact, Low-Profile 6. 5-inch Loaded Subwoofer Enclosure
- Features one EVL-65 D4 200W RMS/400W Max Power Dual 4-ohm Subwoofer Enclosed
- Enclosed Subwoofer is Pre-wired Internally for a Final Impedance Load of 2-Ohms
- Engineered to be Loud and Built to Last | Features 5/8" High Strength MDF Construction
- Subwoofer Features a Grille for Maximum Protection | Finished in a Premium Black Carpet.Enclosure Tuned at 56 Hz | Enclosure Total Depth: 5. 25"...
- 2000 W MAX Power at 2 Ohm x 1 Channel
- 1000 W MAX Power at 4 Ohm x 1 Channel
- High and Low Level Inputs
- Variable Low Pass Crossover, Variable Bass Boost
- Remote Subwoofer Control
- Remote Amplifier Level Controller for RP Amplifier Series
- Allows You To Adjust Your Bass Level Quickly and in the Most Ideal Location
- Compatible with the RP-350.1D, RP-800.1D, RP-800.1DM, RP-1200.1D, RP-1500.1D, RP-1500.1DM, and RP-2000.1D
- Includes Bass Knob and Wire
- Power - 3000 Max x 1 @1-Ohm, 1500 Max x 1 @2-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers...
- Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the...
- Planet Audio provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage...
- 6.5-Inch Dual 4 Ohm Subwoofer
- Peak Power : 400 Watts
- RMS Power : 200 Watts
- Sensitivity : 82.8 dB
- Competition Grade Pressed Paper Cone
- High quality thick 17 feet ft 4 gauge GA power cable
- Premium 3 feet ft 4 gauge GA ground cable/ inline agu fuse holder & 80a fuse included!
- True sound 17 feet ft Double shielded RCA cable (two rca's)
- High quality 17 feet ft/ 18 ga turn-on cable & 20 feet ft/ 16 ga speaker wire
- All accessories/ terminal included! Perfect for any installer shop, great for car/ truck/ motorcycle/ RV/ ATV
- 1 Ohm Stable Operation & Soft Turn On GEN2 Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Continuously Variable Input Gain Control
- LED Power and Protection Indicators
- 4-inch High Compression Titanium Bullet Super Tweeter (sold individually)
- Max Power: 600 Watts | RMS Power: 300 Watts
- 1.75" High Temperature Kapton Voice Coil | Impedance: 4 Ohms
- In-line Capacitor Crossover Included and Connected to Positive Terminal
- Frequency Response: 2.5 kHz - 20 kHz | Sensitivity: 102 dB
FAQ:
Q: Why choose Skar audio’s rp-2000 monoblock subwoofer amplifier?
A: Skar Audio engineered the RP-2000.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its class. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-2000.1D.
Q: What is Skar audio?
A: Skar Audio is a leader in car audio amplifiers, subwoofers, speakers, and more. We focus on the innovation and development of new, superior, car audio products.
Q: What is Skar audio RPD 1D?
A: Skar Audio Rpd Wiring Diagram skar audio rp 1d the skar audio rp 1d is a high performance and very efficient watt. So I’m thinking about getting a skar audio RP and run them at 1 ohm.
Q: How do you remove the LNB on a Skar audio system?
A: Remove and set aside the two screws holding the LNB to the feed arm. 3. Carefully slide the LNB out from the feed arm. Disconnect the four. Skar Audio is a leader in car audio amplifiers, subwoofers, speakers, and more.