1,937 Reviews Scanned
After tons of hours of researching and comparing all models on the market today, Flash Splash finds out the Best pc-7 epoxy vs jb weld of 2022. Check out our list of 20 products.
Bestseller No. 1
JB Weld 50112UK ClearWeld Quick Setting Epoxy 25ml, Clear, 25 ml
- Crystal Clear epoxy sets in 5 minutes and Cures in 1 hour
- Great for tile, most plastics, ceramic, glass, wood, metal and more
- Tensile strength of 4400 psi for a strong, permanent bond
- No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
- J-b weld is proudly made in the USA
Bestseller No. 2
JB Weld Original Cold-Weld 8265-SUK Steel Reinforced Epoxy - Dark Grey (Packaging may vary)
- A two-part system, J-B Weld’s epoxy makes strong, lasting repairs to metal and other surfaces
- Ideal for household, automotive, plumbing, and marine repairs, as well as for arts and crafts, and other projects requiring adhesives
- The two tubes are easily mixed at a 1:1 ratio, forming a permanent bond that can be shaped, tapped, filed, sanded and drilled after curing
- It takes only 4-6 hours to set in room temperature — with a full cure reached in 15-24 hours — at which point it can withstand temperatures of up...
- J-B Weld epoxy has a tensile strength of 3960 PSI, and cures to a dark grey colour
Bestseller No. 3
SaleBestseller No. 4
JB Weld PlasticWeld Quick Setting Plastic Epoxy 25 ml
- Strength : 3200 PSI
- Set Time : 5 Minutes
- Cure Time : 1 Hour
- Dries Translucent Yellow
SaleBestseller No. 5
JB Weld 50176J-B Weld 6 Minute Steel Epoxy
- Sets in 6 minutes
- Full cure within 4-6 hours
- Tensile strength of 3127 PSI
- Able to withstand temperatures up to 300ºF when fully cured
- Great for household repairs, automotive, plumbing, marine, crafts & more
SaleBestseller No. 6
J-B Weld 8281 Original Cold-Weld Epoxy, Dark Grey, 10 oz
- Sets in 4-6 hours to a dark grey colour
- Full cure within 15-24 hours
- Tensile strength of 5020 PSI
- Able to withstand temperatures up to 550ºF when fully cured
- Great for household repairs, automotive, plumbing, marine, crafts & more
SaleBestseller No. 7
J-B Weld 8276 Kwikweld Twin Tube Quick Setting Steel Reinforced 2 Part Epoxy adhesive for Repair,...
- 8276 JB Weld Kwik Weld
- 8276 JB Weld Kwik Weld
- 8276 JB Weld Kwik Weld
SaleBestseller No. 8
J-B Weld 8267UK SteelStik Epoxy Putty
- HIGH STRENGTH - Exceptionally high strength provides a permanent repair to almost anything.
- WET OR DRY SURFACES - Can be used on both wet and dry surfaces.
- MULTIPLE MATERIALS - Some of the most common repairs are metal including aluminium, brass, copper, iron and stainless steel.
- ENVIRONMENTAL RESISTANCE - Resistant to water, chemicals and heat.
- AUTOMOTIVE APPLICATIONS - Perfect for repairing vehicle exhausts, rust damage and other automotive parts.
SaleBestseller No. 9
JB WELD 8237UK JB8237 Plastic Weld Fast-Setting Off White Multi Purpose Reinforced Epoxy Putty, 57 G
- FAST SETTING Provides a fast repair by setting in just 5 minutes.
- HIGH STRENGTH Exceptionally high strength provides a hard permanent repair to almost anything.
- MULTIPLE MATERIALS - Perfect for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites.
- ENVIRONMENTAL RESISTANCE - Resistant to water, chemicals and heat.
- Bonding Strength 3900PSI
Bestseller No. 10
JB Weld Original Cold Weld Formula
- Will set in 4-6 hours, and cure in 16-24 hours
- Waterproof, petroleum, chemical, and acid resistant when fully cured
- Can be drilled, tapped, machined, filed, sanded and painted
- Stong and nontoxic after it has set and temperature resistant up to 500F
- Tensile strength is 3,960 PSI
Bestseller No. 11
J-B Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz (Pack of 2)
- Non Toxic formula
- Easy to use, cures to dark gray
- Use on automotive, brick, concrete, metal and more
- Will set in 4-6 hours, and cure in 16-24 hours
- Waterproof, petroleum, chemical, and acid resistant when fully cured
Bestseller No. 12
JB Weld 8272 2 Oz Dark Grey Marine Weld Epoxy
- J-B MarineWeld is a specially formulated two-part epoxy cold weld system
- Provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others
- MarineWeld sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours
- Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface
- Great for boats, personal watercraft, in/outboard engines and deck & hull accessories
Bestseller No. 14
JB Weld 8297 -DEU HighHeat Heat-Resistant Epoxy Metal Putty for All High Temperature Work
- Temperature durable metal putty. Withstands continuous heat up to 235 °C and tip effects of 260 °C
- Suitable for exhaust manifolds, exhaust pipes, Silencer, engine, blocks and all your high temperature needs.
SaleBestseller No. 15
JB Weld KwikWeld 8276UK - Carded (2) 1 oz. Twin Tubes
- JB Weld KwikWeld 8276UK - Carded (2) 1 oz. Twin Tubes
SaleBestseller No. 16
J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack 10 oz
- Item Category: Bonding Adhesives
- Item Trademark: J-B WELD
- manufacture: J-B Weld
SaleBestseller No. 17
J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz
- EXTREME HEAT - Designed to withstand temperatures up to 538°C.
- FILLER - Designed to be used as a filler for holes and cracks.
- APPLICATIONS - Exhaust manifolds, heat exchangers, mufflers, outdoor grills & fireplaces.
- TEMPERATURE LIMIT - 538°C
- SET TIME - 1 Hour CURE TIME - 24 Hours
Bestseller No. 18
J-B Weld 8271 Kwikweld Professional Quick Setting Steel Reinforced 2 Part Epoxy adhesive for Repair,...
- PROFESSIONAL SIZE - Ideal for high use professionals such as the automotive industry
- FAST SETTING - Sets within minutes and cures within just a couple of hours
- HIGH STRENGTH - Exceptionally high strength provides a permanent repair to almost anything
- STEEL REINFORCED EPOXY - Known as the "original cold weld"
- MULTIPLE MATERIALS - Some of the most common repairs are metal, wood, plastic, concrete, brick and cement
SaleBestseller No. 19
JB Weld TRA50133-TEX Plastic Bonder Syringe, Tan, Pack Of 1
- GAP FILLER - Ideal gap filler for plastics and composites
- PLASTIC TO PLASTIC BONDING - Great for plastic bonding where other epoxies may struggle to adhere
- HIGH STRENGTH - Exceptionally high strength provides a permanent repair
- MULTIPLE MATERIALS - Some of the most common repairs are on thermoset, carbon fibre composites, thermoplastics, coated metals, concrete & more
- ENVIRONMENTAL RESISTANCE - Resistant to water, chemicals and heat
SaleBestseller No. 20
J-B Weld 8297 HighHeat Temperature Resistant Epoxy Putty Stick, Machine Gray, 2oz & J-B Weld 37901...
- Product 1: Able to withstand continuous heat up to 450 degrees Fahrenheit or intermittent heat up to 500 degrees; 3 times stronger at high...
- Product 1: Great for exhaust manifolds, tail pipes, mufflers, engine blocks, duct work, machinery, and other high temperature projects in need of a...
- Product 1: Easy to Use; simply cut the required amount of putty, mix it by thoroughly kneading until a uniform color is reached, then press it firmly...
- Product 1: Adhesive and sealant for extreme temperature applications; when you need to bond metal that gets very hot, whether it's a car muffler or an...
- Product 2: JB WELD EXTREME HEAT: Is formulated for repairs to iron, steel and metal in high temperature environments 1000°F / 538°C. Non-flammable,...
.
FAQ:
Q: What is the mix ratio for PC-7 epoxy?
A: However, PC-7® is probably the only epoxy that does not require precisely a 1:1 mix ratio. Plus or minus 25% A or B does not affect the performance. Adding additional PC-7® (+50%) part B hardener (black) can improve the adhesion to difficult surfaces such as PVC pipe and fittings.
Q: What is PC 7 epoxy used for?
A: This paste epoxy was originally formulated more than 60 years ago for the maximum in bonding power. Professionals to the do-it-yourselfers select PC-7® because of its exceptional adhesion to metals, ceramics, masonry and many plastics. PC-7® is designed for permanent repairs.
Q: How do I lubricate PC-7® epoxy?
A: Be-cause PC-7® is very thick and gooey, it is necessary to apply alcohol or acetone to the tool or gloved fingertips in order to lubricate the surface and shape or feather the applied epoxy. Can I use more of one part of PC-7® in order to speed the curing?
Q: What materials does PC-7 not bond to?
A: Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt. New (20) from $15.18 FREE Shipping on orders over $25.00 shipped by Amazon.