3,159 Reviews Scanned
- Large Capacity: Comes with 512Mb DDR3 RAM and 8GB memory card, provides full storage space.
- SMA Detachable Antenna: Helps to receive strong and clear signal, support 420 ‑ 450MHz UHF.
- OLED Display Screen: Always show you the system status, such as indicating mode, talk group and call sign.
- High Performance: Quad-Core A7 1.2GHz processor and 32bit ARM processor, allow stable and powerful performance.
- Supports PI-STAR's web based digital voice dashboard and configuration tool.
- Large Capacity: Comes with 512Mb DDR3 RAM and 8GB memory card, provides full storage space.
- OLED Display Screen: Always show you the system status, such as indicating mode, talk group and call sign.
- SMA Detachable Antenna: Helps to receive strong and clear signal, support 420 ‑ 450MHz UHF.
- Supports PI-STAR's web based digital voice dashboard and configuration tool.
- High Performance: Quad-Core A7 1.2GHz processor and 32bit ARM processor, allow stable and powerful performance.
- SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF.
- EASY SETTING: Preload Pi-Star sofeware on TF card, no need to download again. Radio Frequency: (UHF: 430-440) This is an updated version, no need to...
- WIFI SSID: Requires 2.4GHz SSID as Pi Zero W does not support 5.8GHz. And WiFi will not work with WEP, make sure your WiFi Password Type is WPA. Turn...
- EASY TO CHARGE: Free micro USB charging cable included, charged with a power bank or connected to a laptop or computer. The Hotspot will also work...
- NOTE: Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R +, 5R Plus, etc. UV series, BF series. More product configuration guide, read product...
- MMDVM hotspot board supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware...
- Hotspot board support Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth...
- MMDVM board saves electricity, High quality TCXO, stable, low BER.
- Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
- Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
- Supports PI-STAR's web based digital voice dashboard and configuration tool. System Combination: Supports digital amateur modes for DMR, D-STAR, P25,...
- Large Capacity: Comes with 512Mb DDR3 RAM and 8GB memory card, provides full storage space. Built-in WiFi: Support 802.11b/g/n wireless protocol.
- SMA Detachable Antenna: Helps to receive strong and clear signal, support 420 8209; 450MHz UHF. Easy to use: Fully assembled, plug and play.
- Organic LED Display Screen: Always show you the system status, such as indicating mode, talk group and call sign.
- High Performance: Quad Core A7 1.2GHz processor and 32bit ARM processor, allow stable and powerful performance.
- 10W/5W/2.5W/1W Selectable: It is a powerful handheld radio with a compact design, featuring high-low quad-power selectable among 10W/5W/2.5W/1W and...
- UHF Dual Mode Radio: You can switch between analog and digital (DMR Tier I & Tier II) operation modes at any time. Works well with hotspot, allows...
- Talker Alias Function: This function, also known as In-band Caller Alias, will allow your pre-set text like your name or callsign displayed on all...
- Large Battery & Crystal Sound: Come with a 3100mAh large battery, the Radioddity GD-AT10G support 14 hours of continuous working time and 90 hours of...
- Our programming software for the Radioddity GD-AT10G has been successfully tested to run under Windows 11 as well.
- The MMDVM Hotspot Board is a fully tested high performance processor. Using high-quality electronic components and precision workmanship. Support DMR,...
- MMDVM motherboard adopts imported components, temperature compensated crystal oscillator. Long-term boot performance is stable, and the bit error rate...
- The antenna digital hotspot board has the advantages of optimized wiring, perfect component layout, low heat generation, and rapid heat dissipation....
- The hotspot plate has a wide RF range, and both the antenna and aluminum housing are included in the set. Safe and reliable operation. Excellent...
- Hotspot boards are available with wide frequencies of 430‑450MH, 433MH and 900MH and work with UHF and VHF. With high strength, wide test range,...
- High Performance: 32bit ARM processor allows stable and powerful performance.
- SMA Detachable Antenna: Helps to receive strong and clear signal, support 430-450MHz, 433MHz, 900MHz UHF and 144 220 Opera FREQ VHF.
- OLED Display Screen: Always show you the system status, such as transmitting status, receiving status, PTT, Mode, etc.
- System Fusion: Supports digital amateur modes DMR, P25, D-STAR and YSF.
- Easy to Use: Can be easily installed on all the current for Raspberry Pi, including for Pi Zero.
- Supports PI-STAR's web based digital voice dashboard and configuration tool.
- Large Capacity: Comes with 512Mb DDR3 RAM and 8GB memory card, provides full storage space.
- SMA Detachable Antenna: Helps to receive strong and clear signal, support 420 ‑ 450MHz UHF.
- OLED Display Screen: Always show you the system status, such as indicating mode, talk group and call sign.
- High Performance: Quad-Core A7 1.2GHz processor and 32bit ARM processor, allow stable and powerful performance.
- [Latest Firmware 4.1.5] In the latest batches shipped to Amazon warehouse, the problem has been solved, we have preload the latest firmware 4.1.5. If...
- [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440) This is upgraded version, do not need to...
- [WIFI SSID] Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA....
- [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in...
- [NOTE] Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. More product setup guide, please read the product...
- [Firmware 4.1.5] In the latest batches shipped to Amazon warehouse, the problem has been solved, we have preload the firmware 4.1.5. If you receive a...
- [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440) This is upgraded version, do not need to...
- [WIFI SSID] Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA....
- [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in...
- [NOTE] If you encounter that the device cannot connect to network after setup, please email us, we will address your issue asap. Not compatible with...
- MMDVM Hotspot USB HAT Board is a substitution for Raspberry pi and a bridge to build a multi-mode digital voice modem with CH340 driver, the driver...
- MMDVM Simplex hotspot board is a DMR transcoding board and a connection to annalog voice and digital mode. supports UHF VHF, frequency range:...
- MMDVM Hotspot is an easy, convenient and ready to use Multi-mode Hotspot that supports C4FM YSF NXDN DSTAR P25 DMR; Support Bluedv: USB Hat board...
- Muliti Functions: MMDVM Board supports mmdvmhost/mmdvmcal on linux/windows to test the mmdvm hat BER/DMR/TX check TCXO offset | BER XX% ; MMDVM_HS...
- IMPORTANT NOTE: When you first time set up, MMDVM hotspot will generete pi-star set up hotspot, which you'll connect with, and goes into pi-star and...
- Widely Compatible: This MMDVM dual hat duplex hotspot board supports for DMR, P 25, D Star and system fusions, strong compatibility.
- For RasPi: This MMDVM hotspot expansion board is suitable RasPi zero, not suitable for RasPi 4.
- 32 Bit ARM: This MMDVM hotspot module adopts 32 bits ARM processor, the RF power is up to 10mW.
- 2 Onboard ADF7021: This MMDVM hotspot module board has 2 onboard ADF7021, allowing duplex operation with 2 time slots on the DMR.
- Easy Installation: The hotspot module has a wide RF range, and it can be easily installed, saving your time and effort.
- Strict quality control and quality assurance, high safety factor, can be used with peace of mind
- Selected raw materials, fine workmanship, can accurately meet your needs
- Suitable for radio communication, DIY production hotspot accessories, etc.
- With strong functionality, good performance, and fast propagation speed
- With small size, easy to store , install and easy to use and practical
- Supports PI-STAR's web based digital voice dashboard and configuration tool.
- Can be installed in all current Raspberry Pi.Up to 10mW RF power.SMA antenna connector,Antenna included.
- Suits for such four digital amateur modes as DMR, D-Star, P25 and System Fusion.
- Mounts cleanly on all current Raspberry Pi's including the Pi Zero. The firmware is pre-loaded and is easily upgraded via software.
- Package includes 1 × Duplex Module, 2 × Antennas, 1 × User Manual, 2 × Pin Headers.
- Support all four digital amateur modes DMR, D-Star, P25 and System Fusion.
- Built-in OLED system status display indicating Mode,Talk Group and Call Sign.
- Built-in LED indicators for status of Power, PTT, COS and Mode.
- Console port SSH 22 for root level access to the operating system.
- Support PI-STAR's web based digital voice dashboard and configuration tool.
- MMDVM Board is compatible with D-STAR, P25, DMR and work with UHF or VHF
- MMDVM Hotspot Board suits for Raspberry Pi 3,Raspberry Pi Zero W
- The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network
- Power supply: Mobile charger or a USB cable connected to your computer or laptop
- All designs will be contributed on MMDVM open source project
- Jumbo-SPOT-RTQ is a fully self-contained digital access point that supports DMR, Dstar, P25 and system convergence communications. Fully assembled and...
- Pi-Star digital voice software is pre-installed and can be easily updated through the software.PI-STAR Digital Voice Control Panel and Configuration...
- Built-in WiFi: 802.11b/G/n.Integrated OLED system status display, indication mode, talkgroup and callsign.Built-in LED indicators for power, PTT, COS...
- Pocket aluminum case.High-performance 32-bit ARM processor.Fully tested.Compatible with DMR, P-25, d-star and System Fusion.Integrated LEDs show...
- Installs cleanly on all current Pis, including the Pi Zero · Preloads firmware and easily updates via software. Do not update the firmware yourself....
- MMDVM access point supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur...
- AURSINC access point board supports Raspberry Pi 3B, 3B+, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or...
- Hotspot plate saves electricity, high quality, stable, low TCXO BER
- Supports MMDVM DMR / YSF / P25 / NXDN / DSTAR / POCSAG mode
- Supports online upgrade, easy-to-use OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
FAQ:
Q: How far does a DMR hotspot reach?
A: I put a Diamond SRH-320A antenna on my DMR hotspot and placed it near a window around 35-40 feet in the air and tested just how far my hotspot would reach to my AnyTone 878 HT. Here are the results: YouTube. K0LWC. 14.1K subscribers.
Q: How does a DMR hotspot work?
A: How does a DMR hotspot work? A hotspot, simply put, is your internet gateway to a particular DMR network. You would use a hotspot when you either don’t have a DMR repeater nearby, or simply don’t want to tie it up for any length of time. This is a very common hotspot configuration and one that really sets the base for understanding how they …
Q: What is the range of a DMR hotspot?
A: Internet Connectivity. First of all,you need to consider whether you want an Ethernet-only or a Wi-Fi connectivity hotspot. Transcoding Capabilities. Secondly,you need to consider the transcoding abilities. … Included Screen. The thirds thing to consider while buying a DMR hotspot must be its screen. … Radio Input. …
Q: How to use DMR effectively?
A: DMR repeaters have 2 “time slots” that share a frequency, allowing for two separate, simultaneous conversations This means one repeater can do the work of two while using less bandwidth than a single analog repeater You must know which Repeater Slot you wish to use in order to set up your radio (more on this later)